Homelite UT10560 Chain & Bar Sizes | Parts Guide

All chain and bar model guides › Homelite guide

USE OUR NEW PARTS FINDER SOFTWARE TO LOCATE YOUR BAR, CHAIN AND OTHER PARTS

CLICK HERE

CHAINSAW PARTS MODEL SEARCH

Homelite UT10560 replacement chain, guide bars and related parts

Find the chain size for your Homelite UT10560 by matching the bar length, pitch, gauge and drive-link count below. These are configurations recorded in our Saw Parts Finder.

Check before ordering: the same model can have different cutting setups. Confirm pitch, gauge, drive links and the bar mount on your fitted bar.

Chain and bar choices by length

Homelite UT10560 12-inch chain and bar

  • 12-inch bar: 45 drive links, 3/8" low profile pitch, .050-inch gauge Common catalog setup. Finder chain reference: 91VXL100U. Guide-bar references: 120DGEA041. Catalog chain families: 91PXL. Some saws may take .325" pitch chain, see other applications. For by-the-link chain, order a loop cut to 45 drive links.
Check Homelite UT10560 12-inch options in the finder

Homelite UT10560 14-inch chain and bar

  • 14-inch bar: 52 drive links, 3/8" low profile pitch, .050-inch gauge Common catalog setup. Finder chain reference: 91VXL100U. Guide-bar references: 140DGEA041. Catalog chain families: 91PXL. Some saws may take .325" pitch chain, see other applications. For by-the-link chain, order a loop cut to 52 drive links.
Check Homelite UT10560 14-inch options in the finder

Homelite UT10560 16-inch chain and bar

  • 16-inch bar: 56 drive links, 3/8" low profile pitch, .050-inch gauge Common catalog setup. Finder chain reference: 91VXL100U. Guide-bar references: 160DGEA041. Catalog chain families: 91PX, 91VXL. Some saws may take .325" pitch chain, see other applications. For by-the-link chain, order a loop cut to 56 drive links.
Check Homelite UT10560 16-inch options in the finder

Homelite UT10560 18-inch chain and bar

  • 18-inch bar: 62 drive links, 3/8" low profile pitch, .050-inch gauge Common catalog setup. Finder chain reference: 91VXL100U. Guide-bar references: 180DGEA041. Catalog chain families: 91PX, 91VXL. Some saws may take .325" pitch chain, see other applications. For by-the-link chain, order a loop cut to 62 drive links.
Check Homelite UT10560 18-inch options in the finder

Sharpening and cutting-system parts

  • 5/32" round-file setup: file reference 70504; file guide 37534; sharpening-kit reference 558488. Match the file to the chain actually installed.
  • No model-specific sprocket reference is recorded for this model in the current finder.

No air-filter, fuel-filter or spark-plug fitment is asserted here for this model: the current finder does not record a model-specific maintenance set.

How to confirm your chain

  1. Read the pitch and gauge markings on your current guide bar.
  2. Count the drive links on your old chain; do not count the cutters.
  3. Match the exact configuration in the finder, including bar mount and sprocket requirements.

Open the finder for Homelite UT10560

Source: current Dawsonville Hardware Saw Parts Finder data, checked November 6, 2026; Oregon 2026 Master Parts Catalog, guide-bar/chain fitment, PDF pages 1025. Other bar mounts, modified equipment and serial-number changes may differ.

Other parts by model

Maintenance references from our Saw Parts Finder. Confirm your exact model, serial number and manufacturer diagram before ordering. Check the finder or product page for current store information; this guide contains no price or stock snapshots.

No maintenance mapping is currently recorded for this exact model. Chain/bar information above is unchanged; contact us with the model and serial for a diagram check.